We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Reinforcement bracket.
ipros is IPROS GMS IPROS One of the largest technical database sites in Japan that collects information on.

Reinforcement bracket(20mm) - List of Manufacturers, Suppliers, Companies and Products

Last Updated: Aggregation Period:Sep 24, 2025~Oct 21, 2025
This ranking is based on the number of page views on our site.

Reinforcement bracket Product List

1~13 item / All 13 items

Displayed results

Single pipe piles that can be driven into hard ground [Shinko Piles]

Both the striking part and the tip are tapered structures, making it a durable single-pole pile that can be reused!

Three Features of the Reusable Single Pipe Pile "Shinko no Kui" ■ Sturdy Driving Section with Tapered Structure By adopting a tapered structure, the strength of the single pipe pile is enhanced, resulting in a pile that does not deform or settle due to impact. ■ Use of 20mm Machined Material and Full Circumference Welding on the Driving Section The driving section uses 20mm thick machined material and is fully welded, making it a highly durable single pipe pile. The top has a flat surface, making it easy for a hammer to strike, allowing for secure driving. ■ Use of Conical Machined Material and Full Circumference Welding on the Tip The tip uses a pointed conical machined material, enabling the single pipe pile to be driven into hard ground. Additionally, - It can be easily installed by simply tightening the eye bolt and securing it with a nut. - Available in two types: S type with a single side ring and W type with double side rings. - Our single pipe pile "Shinko no Kui" is a dedicated product for the single pipe pile "Scat 91." - Compatible with commercially available plastic chains, tar ropes, and steel chains. *For more details, please download the PDF or feel free to contact us.

  • furniture

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reinforcement hardware for wooden houses [Strong wind and earthquake measures]

It is a fitting for existing buildings. It is also suitable for areas without firebracing foundations or anchor bolts. It can be used for reinforcement with nails or mortise and tenon joints.

The "Build Arm Series" that we handle can be installed in existing buildings and is a low-cost reinforcement hardware for wooden houses that provides measures against strong winds and earthquakes. Some products in our lineup feature a surface treatment with zinc plating that is resistant to moisture and rust. Currently, we are distributing materials that include data from compression and tensile tests for each product. You can view them immediately via "PDF Download." 【Features of Listed Products】 ■ L-shaped Metal AZ/CZ/II EZ - Contributes to preventing the columns from falling out due to twisting phenomena in the floor. ■ Foundation Metal BZ - Prevents uplift of the foundation and displacement from the base due to earthquakes, etc. ■ Tusk Metal TP/Foundation Metal DP - Prevents damage to joints caused by vertical and horizontal shaking due to strong winds and earthquakes. ■ Ease Guard NS-21 - Integrates the foundation, base, and columns from the outside of the building to prevent joint disengagement.

  • Other safety and hygiene products

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New Model: Single Pipe Pile [Scat 91]

A single pipe pile that can be freely extended in length according to the ground and site conditions! Suitable for both manual driving with a hammer and machine driving!

A convenient single pipe pile that can be easily extended to various lengths according to the ground and site conditions! The "Skat 91" comes in three lengths: 1.0m, 1.5m, and 2.0m. By connecting these three types with various lengths of single pipe using our "Tsunagood," you can create single pipe piles of various lengths on-site, accommodating different ground conditions and site environments. Additionally, not only can it be machine-driven, but using our "Tataka (large, medium, small)" allows for driving without deforming the single pipe with a hammer. In any scaffolding environment, you can always keep both feet on the ground and safely drive long single pipe piles alone, enhancing safety and work efficiency while achieving cost reduction. 【Product Features】 - Eliminates the striking part, achieving lower costs for single pipe piles. - Using "Tsunagood" ensures it reaches the support layer reliably. - Various uses can be achieved by attaching rope fittings to the single pipe pile. - Extend! Connect! Pull! Stand up! The convenience of single pipe piles is enhanced. *For more details, please download the PDF or feel free to contact us.

  • furniture

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 12.

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that can achieve seismic retrofitting in a short period with minimal construction.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the site-side angle post to approximately 65mm, allowing for passage even after installation, thus maintaining convenience in narrow or densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. FIT Power Type 12 is compatible with block walls of H1,200mm from the road surface. *We have models available for block walls ranging from H1,200mm to H1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering at Gifu University ■ Patent obtained as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement hardware Kobot

Seismic reinforcement hardware Kobot

The three-dimensional seismic reinforcement cobot... Until now, the reinforcement of houses has focused primarily on "strength" in specific directions using thick iron fittings. 【Features】 ○ The rounded shape of the cobot disperses and absorbs forces such as vertical shaking, horizontal shaking, and twisting. It is an ideal shape to counteract forces. ○ After repeated experiments, the optimal plate thickness (t=2.0mm) has been carefully determined. The cobot provides solid reinforcement for wooden houses. ○ The brace mounting hole set in the center of the cobot's rear allows for free rotation during connection. Therefore, there is no eccentricity. ○ The installation of the cobot body is easy with dedicated stainless coach screws, which also shortens construction time. ● For other functions and details, please download the catalog.

  • Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Single pipe joint [Massgood - Adjustable type]

While cutting down on labor hours and material costs, straighten the piles and assemble the single pipes vertically!

The "Massgood Adjustable Type" is a single pipe joint that vertically raises single pipes, such as the diagonally driven single pipe pile [Scat 91] and extension single pipes. High-tension bolts are used, and the single pipe does not deform even when the bolts are tightened. ~Features of the Single Pipe Joint [Massgood Adjustable Type]~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ Even unskilled workers can raise single pipes vertically by themselves. ■ Effective in narrow spaces where there is no room to drive a disposal pile. *For more details, please download the PDF or feel free to contact us.

  • furniture
  • Other safety and hygiene products
  • Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement fittings for concrete block walls, 'FIT Power' Type 16

Can be installed even in narrow areas like densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It limits the maximum protrusion of the angle support on the site side to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it allows a single worker to perform tightening work from the site side, enabling a reduction in construction time. The FIT Power Type 16 is compatible with block walls of H1, 600mm from the road surface. *We also have types available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round head bolts prevent free rotation ■ Design that maintains convenience even in narrow spaces - Residents can pass through after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patent obtained as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement fittings for concrete block walls, "FIT Power" Type 18

Can be installed in narrow areas such as densely populated urban residential areas! Seismic reinforcement brackets that enable earthquake resistance construction in a short period with minimal work.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that replaces retaining walls. It keeps the maximum protrusion of the site-side angle post to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, since tightening work can be done by one worker from the site side, it allows for a reduction in construction time. The FIT Power Type 18 is compatible with block walls of H1, 800mm from the road surface. *We have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction time and cost reduction ■ Round head bolts prevent spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as "Reinforcement structure and reinforcement members for walls" ■ Certified as a recommended disaster prevention product by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement fittings for concrete block walls 'FIT Power' Type 14

Can be installed even in narrow areas like densely populated urban residential areas! Earthquake-resistant reinforcement brackets that can be constructed quickly and with minimal work for seismic retrofitting.

"FIT Power" is a seismic reinforcement fixture such as a concrete block wall that serves as an alternative to retaining walls. It limits the maximum protrusion of the angle support on the site side to about 65mm, allowing for passage even after installation, making it a convenient design for narrow lots and densely populated residential areas. Additionally, it can be tightened by a single worker from the site side, enabling a reduction in construction time. The FIT Power Type 14 is compatible with block walls of H1, 400mm from the road surface. *We also have models available for block walls ranging from H1,200 to 1,800mm. 【Features of FIT Power】 ■ Lock bolt pile foundation method - Ground friction force is seven times the weight - Shortened construction period and cost reduction ■ Round-headed bolts prevent free spinning ■ Design that maintains convenience even in narrow spaces - Residents can pass through even after installation - Component weight manageable by one person ■ Demonstration experiments conducted under the guidance of the Faculty of Engineering, Gifu University ■ Patented as a "reinforcement structure and reinforcement member for walls" ■ Certified as a recommended product for disaster prevention by the Japan Disaster Prevention Safety Association *For more details, please refer to the PDF materials or feel free to contact us.

  • Anti-vibration, earthquake-proof, vibration-isolating devices

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Seismic reinforcement system hardware / Cobots

The optimal earthquake measures for wooden houses! This groundbreaking seismic reinforcement hardware can disperse and absorb forces such as "vertical shaking," "horizontal shaking," and "twisting."

The "Kobot" is a revolutionary three-dimensional seismic reinforcement hardware that can disperse and absorb forces such as "vertical shaking," "horizontal shaking," and "twisting." Until now, reinforcement for houses has focused primarily on the "strength" in specific directions using thick iron hardware. However, the way forces are applied during events like earthquakes is three-dimensional, making "strength" in a specific direction insufficient. The solution to this challenge is the "three-dimensional seismic reinforcement hardware/Kobot," which has an ideal shape to counteract forces. 【Features】 - Disperses and absorbs forces such as vertical shaking, horizontal shaking, and twisting. It has an ideal shape to counteract forces. - After repeated experiments, it is set to the optimal plate thickness (t=2.0mm). The Kobot provides solid reinforcement for wooden houses. - The brace mounting hole set in the center of the Kobot's rear allows for free rotation during connection, eliminating eccentricity. - Installation of the Kobot body is easy with dedicated stainless coach screws, reducing construction time. - The design of the house is not compromised even when the Kobot is exposed. *For other functions and details, please inquire or download the catalog.

  • Other work tools

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

FIT GATE construction example: shutter gate + arch gate + fence

The finishing work was done by the contractor! They completed it with a gentle impression for the gate.

We would like to introduce a case where a gate that integrates a shutter gate and an arch gate was manufactured with a split structure, and connection work was carried out on-site. The wall, which is the same height as the shutter gate that divides the garage space, was manufactured with FIT HIGH-WALL. The dimensions from the shutter gate to the wall are approximately W12,000 × H2,925 × D5,920 mm. [Case Overview] - The wall, which is the same height as the shutter gate that divides the garage space, was manufactured with FIT HIGH-WALL. - Installation time was approximately 6 hours. - The gate was finished with a gentle impression. *For more details, please refer to the related links or feel free to contact us.

  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration